FOR IMMEDIATE RELEASE | April 29, 2020

New recycling method could make polyurethane sustainable

Reprocessing Postconsumer Polyurethane Foam Using Carbamate Exchange Catalysis and Twin-Screw Extrusion
ACS Central Science

Polyurethanes (PUs) are used in many products, such as mattresses, insulation, footwear and construction materials. Wear and replacement of these products generates lots of waste and creates demand for new PUs, often made from toxic building blocks. A few methods have attempted to recycle PU waste, but these techniques result in lower-value products. Now, researchers report in ACS Central Science a way to recycle used PU into equivalent or even higher-value items.

Conventional PU can’t be recycled simply by heating because it consists of polymer networks held together by strong chemical bonds that don’t flow when heated. Instead, PU can only be downcycled into less useful materials. Some research groups have made new types of PU with crosslinks that can be broken and reformed in response to a stimulus, allowing it to be recycled. But this approach would require the industry to commercialize new starting materials, and it wouldn’t address the issue of conventional waste lingering in landfills. Also, these methods haven’t been tested on foams, the form in which most PU is used in products. Another research group developed a way to recycle conventional polyester or modified PU by soaking it in a catalyst solution that enabled the material to be re-shaped into similar- or higher-valued products. William Dichtel and colleagues wanted to explore this concept further by using different crosslink exchange chemistry and coupling it with industrially relevant processing techniques to recycle conventional PU foams into rubber and hard plastic.

To do this, the team started by grinding up PU foam or film and mixing the particles in a catalyst solution. After drying, the particles were compression molded to form new films. Compression molded films formed good-quality products, but foam treated in this way produced cracked and inhomogeneous materials. The researchers solved this problem by developing a twin-screw extrusion process that improved mixing and air removal in recycled foams, compared to the compression molding approach. They say this new method could be used for continuous recycling of the large amounts of PU waste currently landfilled or newly produced.

The authors declare the following competing financial interests: Northwestern University, the University of Minnesota and Cornell University have filed a patent application related to the findings described in this manuscript.

The authors acknowledge funding from the National Science Foundation via the Center for Sustainable Polymers.

The American Chemical Society (ACS) is a nonprofit organization chartered by the U.S. Congress. ACS’ mission is to advance the broader chemistry enterprise and its practitioners for the benefit of Earth and its people. The Society is a global leader in providing access to chemistry-related information and research through its multiple research solutions, peer-reviewed journals, scientific conferences, eBooks and weekly news periodical Chemical & Engineering News. ACS journals are among the most cited, most trusted and most read within the scientific literature; however, ACS itself does not conduct chemical research. As a specialist in scientific information solutions (including SciFinder® and STN®), its CAS division powers global research, discovery and innovation. ACS’ main offices are in Washington, D.C., and Columbus, Ohio.

To automatically receive press releases from the American Chemical Society, contact newsroom@acs.org.

###

Follow us:  

Media Contact

ACS Newsroom
newsroom@acs.org