FOR IMMEDIATE RELEASE | March 24, 2021
Copper foam as a highly efficient, durable filter for reusable masks and air cleaners
During the COVID-19 pandemic, people have grown accustomed to wearing facemasks, but many coverings are fragile and not easily disinfected. Metal foams are durable, and their small pores and large surface areas suggest they could effectively filter out microbes. Now, researchers reporting in ACS’ Nano Letters have transformed copper nanowires into metal foams that could be used in facemasks and air filtration systems. The foams filter efficiently, decontaminate easily for reuse and are recyclable.
When a person with a respiratory infection, such as SARS-CoV-2, coughs or sneezes, they release small droplets and aerosolized particles into the air. Particles smaller than 0.3 µm can stay airborne for hours, so materials that can trap these tiny particles are ideal for use in facemasks and air filters. But some existing filter materials have drawbacks. For example, fiberglass, carbon nanotubes and polypropylene fibers are not durable enough to undergo repeated decontamination procedures, while some further rely on electrostatics so they can’t be washed, leading to large amounts of waste. Recently, researchers have developed metallic foams with microscopic pores that are stronger and more resistant to deformation, solvents, and high temperatures and pressures. So, Kai Liu and colleagues wanted to develop and test copper foams to see if they could effectively remove submicron-sized aerosols while also being durable enough to be decontaminated and reused.
The researchers fabricated metal foams by harvesting electrodeposited copper nanowires and casting them into a free-standing 3D network, which was solidified with heat to form strong bonds. A second copper layer was added to further strengthen the material. In tests, the copper foam held its form when pressurized and at high air speeds, suggesting it’s durable for reusable facemasks or air filters and could be cleaned with washing or compressed air. The team found the metal foams had excellent filtration efficiency for particles within the 0.1-1.6 µm size range, which is relevant for filtering out SARS-CoV-2. Their most effective material was a 2.5 mm-thick version, with copper taking up 15% of the volume. This foam had a large surface area and trapped 97% of 0.1-0.4 µm aerosolized salt particles, which are commonly used in facemask tests. According to the team’s calculations, the breathability of their foams was generally comparable to that of commercially available polypropylene N95 facemasks. Because the new material is copper-based, the filters should be resistant to cleaning agents, allowing for many disinfection options, and its antimicrobial properties will help kill trapped bacteria and viruses, say the researchers. In addition, they are recyclable. The researchers estimate that the materials would cost around $2 per mask at present, and disinfection and reuse would extend their lifetime, making them economically competitive with current products.
The authors acknowledge funding from the Georgetown Environmental Initiative Impact Program Award, the McDevitt bequest to Georgetown University and Tom and Ginny Cahill’s Fund for Environmental Physics at University of California Davis.
The American Chemical Society (ACS) is a nonprofit organization chartered by the U.S. Congress. ACS’ mission is to advance the broader chemistry enterprise and its practitioners for the benefit of Earth and all its people. The Society is a global leader in promoting excellence in science education and providing access to chemistry-related information and research through its multiple research solutions, peer-reviewed journals, scientific conferences, eBooks and weekly news periodical Chemical & Engineering News. ACS journals are among the most cited, most trusted and most read within the scientific literature; however, ACS itself does not conduct chemical research. As a leader in scientific information solutions, its CAS division partners with global innovators to accelerate breakthroughs by curating, connecting and analyzing the world’s scientific knowledge. ACS’ main offices are in Washington, D.C., and Columbus, Ohio.
To automatically receive press releases from the American Chemical Society, contact email@example.com.
Note: ACS does not conduct research, but publishes and publicizes peer-reviewed scientific studies.